Pitched Roofing System
Rope Access
WHAT IS IT?:
Pitched Roof System Rope Access is the
safest and the most effective means for workers to gain access of a pitched
roofing system. A form of rope access for Property Claims Adjusters, Forensic
Engineers, Home Inspectors, maintenance and service providers that allows them
to construct a system of fall protection from the safety of ground level that
will provide them with the access that they need to complete their work.
What Is The
General History Of Rope Access?:
The worldwide Rope Access
Community began to get organized in the late 80’s with the founding of IRATA (the Industrial Rope Access Trade
Association). IRATA started out as a rope access resource in the UK for the
offshore Oil & Gas Industry however since then has merged into the
mainstream of most all industries who struggle on a daily basis with work that
is difficult to access.
1996 marked the emergence of SPRAT (the Society of Professional Rope Access Technicians) a North
American group of rope access professionals who were tired of getting hassled
by OSHA for using rope access equipment and techniques on the job site that
would have otherwise required massive amounts of scaffolding to complete.
SPRAT’s “Safe
Practices for Rope Access Work” is THE North American Rope Access Worker’s
Constitution. It is the most valid assembly of rope access information based on
the consensus of the leaders of the North American Rope Access Industry. It is also very similar to that which is
documented in IRATA’s “International Code of Practice”.
ACRABAT (The Association for Certified Rope Access Building
Assessment Technicians) was created in 2008 by Property Claims Adjusters were
fed up with being forced to inspect the increasingly aggressive pitched roofing
systems of the modern housing construction industry.
ACRABAT is currently the only professional association
dedicated to developing guidelines for rope access on “Pitched Roof” systems
that operates within the SPRAT standards for “Safe Practices for Rope Access
Work”. ACRABAT currently holds the lead seat in SPRAT’s committee for
developing pitched roof rope access guidelines under the category of “Buildings
and Urban Environments”.
Pitched roof specific rope access guidelines will establish
much needed criteria for equipment, worker management, standard operating
procedures and training , slated to be available sometime in 2014.
WHO Is OSHA And What Is
Their Opinion Of Rope Access?:
OSHA (The Occupational Safety and Health Administration) an agency
of The United States Department of Labor, was established in 1971 to reduce the
rate of worker injuries and fatalities by setting and enforcing safety standards
within the workplace. OSHA impact on safety within the workplace is an
estimated 84.5% reduction in worker fatalities (based on comparison of worker fatalities from 1970 – 2009) .
Fact: Human Beings in general are willing to put themselves at great risk
for injury in order to provide for the financial wellbeing of themselves and
their families. To put it in its simplest terms, OSHA put all employers on
notice that there would be real consequences for exploiting this human
tendency.
Please Note: Rope Access is
a relatively new concept that has only been around for a couple of decades now
and is NOT YET recognized by OSHA 1926.500 standards for fall protection.
However, since 1996, SPRAT has successfully taken on OSHA by
educating them and getting them to agree to what is called a “variance” for
rope access as a valid form of fall protection.
To qualify for this so called “variance” employers must comply with what
is written in SPRAT’s signature standards document; “Safe Practices for Rope
Access Work”.
WHO Is ANSI And What Is
Their Opinion Of Rope Access?:
ANSI (American National Standards Institute) was started over 100
years ago when they began assembling a system of voluntary safety standards
based on science and fact. Today, ANSI is recognized as the most professional
and valid North American safety standards organization. ANSI has established
standards for Fall Protection as well listed under the title of ANSI Z359.. When it comes to the topic of Fall Protection,
ANSI safety standards are considered so valid that OSHA in fact will often
simply copy and paste them into their own 1926.500 updates.
Please Note: Rope Access is not yet formally recognized by
ANSI under their “Fall Protection” code yet…HOWEVER, ANSI has announced that
Z359 will be updated this year to include Z359.8 Rope Access Systems, which
will finally sanction the use of Rope Access as a form of fall protection as it
is outlined in SPRAT’s “Safe Practices for Rope Access Work”.
What Does The Future of
Pitched Roof Rope Access Look Like?:
“Rope & Harness” / Rope Access certification is a very valuable
tool for all Property Claims Adjusters AND one of the hottest topics at this
year’s PLRB (Property & Liability Resource Bureau) conference (the nation’s largest Insurance claims
education & exhibition event). Property Claims service employers are
becoming increasingly aware of the fact that a properly trained rope access workforce offers significant
reductions in worker injuries AND the negative consequences associated with
product liability.
Please Note: Claim decisions made on roofing systems without the benefit
of human access and touch are difficult at best to justify.
Choose Your Rope Access Certification Vendor Wisely: Do not select
a rope access training company that does not base their program on the
foundation of what has been established by IRATA or SPRAT.
